OFSC 004 Fiber Optic Splice Closure , horizontal 24 48 96 fiber
splice joint Closure
Sealing Performance
Pressurized up to 100Kpa±5Kpa into the sealed FOSC,then put the
OFSC into the water 15minutes.There are no air bubbles.Or there is
no change of air pressure within 24 hours.
Re-entry performance
Re-entry the OFSC 3 times as normal working condition,and
pressurized up to 100Kpa±5Kpa into the sealed OFSC,then put the
OFSC into the water 15minutes.There are no air bubbles.Or there is
no change of air pressure within 24 hours.
Mechanical Character
1.Tensile Test:
The axial tensile strength should be not less than 800N,and there
is not any crack.
2.Squeezing test:
The OFSC can bear 2000N/m2 ,the lasting time is 1 minute.There is
not any crack.
3.Impact test
The OFSC can bear 16N.M impact 3 times,there is not any crack.
4.Bending test:
The link part of cables and OFSC can bear 150N bending strength.The
bending angle is ±450 ,repeat 10 times,there is not any crack.
5.Torsion Test:
The OFSC can bear 50N.m torsion.The torsion angle is ±90°,repear 10
times,there is not any crack.
Temperature Cycling Test
Pressurized up to 60KPa±5Kpa,the OFSC can bear temperature cycling
from -40°C to +65°C.Put the sample to the high temperature
surrounding 2 hours,then 2 hours at room temperature,then 2 hours
at low temperature,last return to room temperature 2 hours ,repeat
not less than 10 times cycling.The droping of the air pressure not
more than 5Kpa.Put the sample into the warter for 15 minutes,there
is not any bubbles.
Voltage Resistance
Put the sealed closure into the 1.5m deep water for 24h.15kv direct
current between the metal parts of both ends or between the earth
and metal parts,there is no puncture and no flying-arc.
(Insulation Resistance
Put the sealed closure into the 1.5m deep water for 24h.The
insulation resistance between the metal parts of both ends or
between the earth and metal parts should be not less than 2×104MΩ
Competitive Advantage
DYS strictly enforce the ISO9001 quality management system,
companies with good facilities and qualified human resources
management to ensure product quality stability and excellent
performance; and good after-sales service, to win the trust of
customers, productsexported to Europe and the United States and
Southeast Asian countries.
